12 fiber SC/APC Fanout cable 55 meters

This product 12 fiber SC/APC Fanout cable 55 meters. One end is terminated with an LC/UPC connector, while the other end consists of unterminated (bare) fiber ends. These optical pigtails enable quick and convenient connections to CATV systems, optical switches, or other telecommunications equipment during FTTH line construction and installation.

Features

Application: Outdoor/Indoor
Fiber quantity: 12 fiber
Cable dimensions: 0.9 mm
Length：55 m

DESCRIPTION Specification Test

REVIEW

Key features

Dual-end Configuration
Precise Core Specifications
Easy Installation & Deployment
Dual-scenario Compatibility
Optimized Length for On-site Use
Efficient FTTH Deployment Support

Application

Applied to optical transmitters, receivers, PON boxes, and other telecom devices for FTTX connectivity solutions.

Technical

Model name	12-core SC/APC Fanout Pigtail Fiber 35 meters
Fiber type	G657.A1
Cable assemblies	Simplex
Jacket material	LSZH
Cable diameter, mm	0.9
Length,m	55
Connector type	SC
End face	APC
Working wavelength, nm	1310/1550
Insertion loss, dB	≤0.25dB
Return loss, dB	≥60
Exchange ability	≤0.2dB
Operating temperature（℃）	-10 ~ 70
Storage temperature（℃）	-40~85

Test

Insertion and return losses test

The loss of signal, which occurs along the length of a fiber optic link, is called insertion loss, and insertion loss test is for measuring the losses of light appears in fiber optic core and fiber optic cable connections. The measurement of the amount of light that is reflected back toward the source is called return loss test. and insertion loss and return loss are all measured in decibels(dBs).

Regardless of type, when a signal travels through a system or a component, power (signal) loss is unavoidable. When light passes through the fiber, if the loss is very small, it will not affect the quality of the optical signal. The higher the loss, the lower the amount reflected. Therefore, the higher the return loss, the lower the reflection and the better the connection.

For fiber core connections test is operated by IEC-61300-3-4 (Method B)standards. Procedure IEC-61300-3-4 (Method C) standards.

We use test equipment in our daily quality testing,To ensure our customer could receive products which meet quality requirements. Our internal laboratory is capable to proceed such a series of standard related type tests.