12-core SC/APC Fanout Pigtail Fiber 35 meters

The 12-Core SC/APC Fanout Pigtail Fiber 35 Meters is a pre-terminated fiber optic cable featuring SC/APC connectors on one end. It is widely used in FTTH network deployments, fiber distribution frames, and terminal box installations to enable stable, low-loss signal transmission between feeder cables and end-user devices.

Features

Application: Outdoor/Indoor
Fiber quantity: 12 fiber
Cable dimensions: 0.9 mm
Length：35 m

DESCRIPTION Specification Test

REVIEW

Key features

Customizable Specifications
Superior Optical Performance
User-Friendly Design
Rigorous Quality Assurance
Meets the strict criteria of GR-326-CORE and ROHS
High Durability & Interchangeability
Cost-Effective Solution

Application

Applied to optical transmitters, receivers, PON boxes, and other telecom devices for FTTX connectivity solutions.

Technical

Model name	12-core SC/APC Fanout Pigtail Fiber 35 meters
Fiber type	G657.A1
Cable assemblies	Simplex
Jacket material	LSZH
Cable diameter, mm	0.9
Length,m	35
Connector type	SC
End face	APC
Working wavelength, nm	1310/1550
Insertion loss, dB	≤0.25dB
Return loss, dB	≥60
Exchange ability	≤0.2dB
Operating temperature（℃）	-10 ~ 70
Storage temperature（℃）	-40~85

Test

Insertion and return losses test

The loss of signal, which occurs along the length of a fiber optic link, is called insertion loss, and insertion loss test is for measuring the losses of light appears in fiber optic core and fiber optic cable connections. The measurement of the amount of light that is reflected back toward the source is called return loss test. and insertion loss and return loss are all measured in decibels(dBs).

Regardless of type, when a signal travels through a system or a component, power (signal) loss is unavoidable. When light passes through the fiber, if the loss is very small, it will not affect the quality of the optical signal. The higher the loss, the lower the amount reflected. Therefore, the higher the return loss, the lower the reflection and the better the connection.

For fiber core connections test is operated by IEC-61300-3-4 (Method B)standards. Procedure IEC-61300-3-4 (Method C) standards.

We use test equipment in our daily quality testing,To ensure our customer could receive products which meet quality requirements. Our internal laboratory is capable to proceed such a series of standard related type tests.